Household Hypochlorous Acid Machine

Household hypochlorous acid machine

 

        Household hypochlorous acid machine also known as hypochlorite generator which is a new type of equipment used for on-site production of hypochlorous acid solution, suitable for the use of family and office. Electrochemical activation (ECA) technology is used to produce hypochlorous acid solution suitable for household disinfection through electrolytic generator of micro-porous nano membrane using only salt and water as raw materials. There is no potential harm in the whole production process.

• Enter Water Pressure: ≤0.4Mpa(No more than normal tap water pressure);
• Maximum Output: 20L/H(Hypochlorous acid water yield);
• Active Chlorine Range: 10～250ppm(Adjust by adding salt ratio and current and voltage);
• PH: 3～6(Adjust by flow, current, and voltage);
• Maximum Current: 8.1A(It is recommended to use between 5-7A for the best effect.);
• Maximum Power: 400W(Recommended voltage should not exceed 36V (safety voltage);
• Input Voltage: 220V 50～60Hz;
• Maximum Continuous Running Time: 5h;

The Application Of The Household Hypochlorous Acid Machine

1). Disinfection of endoscopic/surgical instruments.It can be cleaned or disinfected by ordinary immersion.Ordinary immersion: Before disinfection, the objects shall be soaked and cleaned with alkaline cleaning agent or enzymatic lotion, rinsed with flowing water and drained. At room temperature, the objects shall be immersed in 200mg/L hypochlorous acid water disinfectant solution for 20min, then rinsed with sterile water and wiped dry with sterile cotton cloth .When the endoscope is used to clean and disinfect the machine with ultrasonic vibration or manual washing to strengthen the previous process, the process is as follows: after the organic matter is removed with clean water, the special cleaning agent is used to wash 2min, pure water for 2min, 200mg /L hypochlorous acid for 3min.

2). Disinfection of sore/wound surface. Use 100mg/L hypochlorous acid water disinfectant solution. Exposed sore/wound surface: After dewatering, spray the wound and the immediate surrounding area as much as possible until liquid covers the wound evenly.2 times to 3 times a day; Score or wound dressing: Match the dressing cycle. Each time dressing changing, you can first spray the dressing that is soaked with the wound surface for easy removal. Then use the product with sterile cotton balls or medical gauze to clean necrotic tissues and secretions; Apply wet spray on one side of the dressing in contact with the wound to the affected area. During the interval between dressing changes, this product can also be sprayed directly onto the dressing dressing according to the humidity of the wound.

3). Disinfection of skin mucosa. Apply 100mg/L of hypochlorous acid water disinfectant solution to the desired area (inflammation and ulcer surface) and the adjacent surrounding area in sufficient quantity until the liquid covers it evenly; Or wipe with a sterile cotton swab or gauze soaked in the product.

4). Air disinfection. Use 100mg/L hypochlorous acid water disinfectant solution. Eliminate the pollution source, close the doors and Windows, and use a special aerosol atomizer to spray the original liquid at the dosage of 5ml/m into the air by hand. Spray uniformly from inside to outside, from top to bottom, from left to right. The effect time is 30min, and then it can be put into use. [Note: It can be used for dynamic elimination without clearing the land for human and livestock.

5). Hand cleaning and disinfection. Use 150mg/L of hypochlorous acid water disinfectant solution. Sanitary hand disinfection: take sufficient amount of disinfectant to completely cover or immerse the sanitized part of the hand for 1min; Surgical hand disinfection: apply an appropriate amount of disinfectant evenly on the hands, forearms and 1/3 under the upper arms for 3 minutes after surgery.

6). Disinfection of surfaces and fabrics. After removing the contaminant, wipe and spray the object or surface to be disinfected with 100mg/L disinfectant solution, or soak the fabric with the same concentration of disinfectant for 5min.then naturally dried or drained.

7). Disinfection of secondary water supply facilities. After cleaning and decontamination, 80mg/L of disinfectant stock solution is evenly sprayed on the inner surface of secondary water supply and storage facilities from left to right, top to bottom and from inside out with high-pressure water gun, leaving no dead Angle. After spraying, put the hole cover for 5min ~ 10min, then discharge clean disinfectant and open the inlet valve to store water.

8). Disinfection of fruits, vegetables and utensils. Injected fruits, vegetables and utensils into 100mg/L of original disinfectant solution after cleaning, and then drained for 5 minutes. For utensils made of other metals except for stainless steel, rinse with clean water after disinfection.

Baoji Ruicheng Titanium Metal Co., Ltd.

Baoji Ruicheng Titanium Metal Co., Ltd. Production of MMO titanium anode Assembly for Sodium Hypochlorite Generator with titanium anode shape, ruthenium-iridium titanium plate titanium anode Assembly, ruthenium-iridium titanium mesh titanium anode Assembly, ruthenium-iridium titanium plate mesh titanium anode Assembly, and other shapes and specifications, product application range from 50 grams to 1 kg sodium hypochlorite generator,we also could customized according to customer drawing to produce MMO titanium anode Assembly for Sodium Hypochlorite Generator.

 

Contact Us

Any question please contact us: sales3@bjrcti.com

Hot Tags: household hypochlorous acid machine, suppliers, manufacturers, factory, customized, wholesale, bulk, pricelist, quotation, in stock, free sample, Sodium Hypochlorite Generator Titanium Anode, Titanium Tube, Titanium Anode for Coking Wastewater, Titanium Target, Acid Electrolyzer, Titanium Anode for Elextrolyzer