Middle Electrolysis Cell

Production Introduction

1.Technical indicators of middle electrolysis cell

Size(mm):263mmX185mmX95mm

Weight:5.0KG

INput Flow:Max 1000L/h,output 500L/h

Voltage(V):0-25A(Temperature<45℃)

Current(A):0-24V(Temperature<45℃)

PH:2.6-12.5

Coating:Ruthenium-Iridium/Platinium

Water pressure:0.1-0.4Mpa

Power:DC power

Membrane:Ion exchange membrane

Serve Life:3 year(1 year warranty)

2. Directions for use for middle elecrolysis cell
1. The Middle electrolysis cell is installed vertically. The single nozzle is the inlet and the double nozzle is the outlet.
2. When the Middle electrolysis cell  is started, the water is first connected and then powered on; when it is closed, the power is cut off first and then the water is cut off.
3.The water to be used in the electrolyzer must be filtered clean tap water or pure water.
4. The water pressure is 0.1~ 0.4mpa, and the outlet shall not be closed during use, otherwise the electrolyzer will be damaged.
5. The terminals on both sides of the electrolyzer are connected to positive and negative poles, and the electricity must be DC power supply. Adjust the electricity size according to the PH level required (the electricity size varies according to the water quality, so it is necessary to start from the small electricity experiment)
6. Can reverse the pole but not frequently, reduce the electrolytic cell internal scaling phenomenon.
7. Not collision, Please use it at normal temperature.

3. Chematic diagram of Middle electrolysis cell

4. Notice

1. Ensure that NaCl is fully dissolved and the interior of the dissolved salt box is clean, so as to prevent un-dissolved particles from blocking the pipeline.

2. Do not turn on the power supply before water outlet, so as to avoid damage to the internal structure of the electrolytic cell.

3. Do not run for long at maximum power to avoid burning out the dc power supply.

5. Frequently problem and solutions

1. When the output goes down: Increase the amount of salt solution injected

2. When the active chlorine concentration goes down) increase the amount of salt solution injected) increase the current) reduce the outlet flow.

3. When the alkaline water increases: Turn down the alkaline water outlet valve.

VII. RC-001 HCLO Generator Display

Remark:we offer discount according to the quantity.

Contact us

Any question please feel free to contact with sales2@bjrcti.com

Hot Tags: middle electrolysis cell, suppliers, manufacturers, factory, customized, wholesale, bulk, pricelist, quotation, in stock, free sample, Titanium Bar, Titanium Anode Rod, platinum plated titanium anode, 6mm titanium bolts, Disinfectant Manufacturing Equipment, titanium m6 bolts